Transient Absorption Spectroscopy Research Articles

Ultrafast restricted intramolecular rotation in molecules with aggregation induced emission.

In this work, the ultrafast intramolecular rotation behavior of 1,1,2,3,4,5-hexaphenylsilole has been investigated in several solutions with different viscosities using femtosecond transient absorption spectroscopy combined with density functional theory and time-dependent density functional theory calculations. It is demonstrated that the nonradiative process, which competes with radiative decay, involves two main stages, namely the restricted intramolecular rotation and internal conversion processes. The intramolecular rotation depends on viscosity and presents a significant restriction. The restricted rotational rate is determined to be dozens of picoseconds. The following nonradiative process is strongly dominated by intramolecular rotation. The nonradiative decay rate will decrease with the increase in viscosity, leading to a rise in the radiative probability and photoluminous yield. These results have borne out the mechanism of ultrafast restricted intramolecular rotation of aggregation induced emission and provided a detailed photophysical picture of nonradiative processes.

Mechanistic studies on single-electron transfer in frustrated Lewis pairs and its application to main-group chemistry.

Advances in the field of frustrated Lewis pair (FLP) chemistry have led to the discovery of radical pairs, obtained by a single-electron transfer (SET) from the Lewis base to the Lewis acid. Radical pairs are intriguing for their potential to enable cooperative activation of challenging substrates (e.g., CH4, N2) in a homolytic fashion, as well as the exploration of novel radical reactions. In this review, we will cover the two known mechanisms of SET in FLPs-thermal and photoinduced-along with methods (i.e., CV, DFT, UV-vis) to predict the mechanism and to characterise the involved electron donors and acceptors. Furthermore, the available techniques (i.e., EPR, UV-vis, transient absorption spectroscopy) for studying the corresponding radical pairs will be discussed. Initially, two model systems (PMes3/CPh3+ and PMes3/B(C6F5)3) will be reviewed to highlight the difference between a thermal and a photoinduced SET mechanism. Additionally, three cases are analysed to provide further tools and insights into characterizing electron donors and acceptors, and the associated radical pairs. Firstly, a thermal SET process between LiHMDS and [TEMPO][BF4] is discussed. Next, the influence of Lewis acid complexation on the electron acceptor will be highlighted to facilitate a SET between (pBrPh)3N and TCNQ. Finally, an analysis of sulfonium salts as electron acceptors will demonstrate how to manage systems with rapidly decomposing radical species. This framework equips the reader with an expanded array of tools for both predicting and characterizing SET events within FLP chemistry, thereby enabling its extension and application to the broader domain of main-group (photo)redox chemistry.

Effect of Lattice Disorder on Exciton Dynamics in Copper-Doped InP/ZnSexS1-x Core/Shell Quantum Dots.

InP/ZnSexS1-x core/shell quantum dots (QDs) with varying Cu concentrations were synthesized by a one-pot hot-injection method. X-ray diffraction and high-resolution transmission electron microscopy results indicate that Cu doping did not alter the crystal structure or particle size of the QDs. The optical shifts in UV-visible absorption and photoluminescence (PL) suggest changes in the electronic structure and induction of lattice disorder due to Cu doping. Ultrafast transient absorption spectroscopy (TAS) reveled that a higher Cu-doping level leads to faster charge carrier recombination, likely due to increased nonradiative decay from defect states. Time-resolved PL (TRPL) studies show longer average lifetimes of charge carriers with increased Cu doping. These findings informed the development of a kinetic model to better understand how Cu-induced disorder affects charge carrier dynamics in the QDs, which is important for emerging applications of Cu-doped InP/ZnSexS1-x QDs in optoelectronics.

Photoinduced One-Electron Chloride Oxidation in Water Using a Pentacationic Ir(III) Photosensitizer.

A novel iridium(III) photosensitizer containing pyridinium-decorated terpyridines has been used for the photo-oxidation of chloride in water. Despite its abundance, the very positive one-electron reduction potential (E° Cl•/- = 2.1-2.4 V vs NHE) restricted its use in energy conversion schemes and artificial photosynthesis. The kinetics of the photoinduced electron transfer process were investigated through Stern-Volmer quenching experiments and nanosecond transient absorption spectroscopy, which provided unambiguous evidence that photoinduced chloride oxidation occurred with a quenching rate constant kq = 5.0 × 1010 M-1 s-1. Complementary spectroelectrochemistry and photolysis experiments confirmed the formation of the reduced photosensitizer and showcased the redox and photostability of the Ir(III) photosensitizer that holds great promise for the HX splitting approach.

Photodriven electron-transfer dynamics in a series of heteroleptic Cu(I)-anthraquinone dyads.

Solar fuels catalysis is a promising route to efficiently harvesting, storing, and utilizing abundant solar energy. To achieve this promise, however, molecular systems must be designed with sustainable components that can balance numerous photophysical and chemical processes. To that end, we report on the structural and photophysical characterization of a series of Cu(I)-anthraquinone-based electron donor-acceptor dyads. The dyads utilized a heteroleptic Cu(I) bis-diimine architecture with a copper(I) bis-phenanthroline chromophore donor and anthraquinone electron acceptor. We characterized the structures of the complexes using x-ray crystallography and density functional theory calculations and the photophysical properties via resonance Raman and optical transient absorption spectroscopy. The calculations and resonance Raman spectroscopy revealed that excitation of the Cu(I) metal-to-ligand charge-transfer (MLCT) transition transfers the electron to a delocalized ligand orbital. The optical transient absorption spectroscopy demonstrated that each dyad formed the oxidized copper-reduced anthraquinone charge-separated state. Unlike most Cu(I) bis-phenanthroline complexes where increasingly bulky substituents on the phenanthroline ligands lead to longer MLCT excited-state lifetimes, here, we observe a decrease in the long-lived charge-separated state lifetime with increasing steric bulk. The charge-separated state lifetimes were best explained in the context of electron-transfer theory rather than with the energy gap law, which is typical for MLCT excited states, despite the complete conjugation between the phenanthroline and anthraquinone moieties.

Regulating the Phase and Optical Properties of Mixed‐Halide Perovskites via Hot‐Electron Engineering

AbstractThe rapid development of mixed‐halide perovskites has established a versatile optoelectronic platform owing to their extraordinary physical properties, but there remain challenges toward achieving highly reliable synthesis and performance, in addition, post‐synthesis approaches for tuning their photoluminescence properties after device fabrication remain limited. In this work, an effective approach is reported to leveraging hot electrons generated from plasmonic nanostructures to regulate the optical properties of perovskites. A plasmonic metasurface composed of Au nanoparticles can effectively tailor both photoluminescence and location‐specific phase segregation of mixed‐halide CsPbI2Br thin films. The ultrafast transient absorption spectroscopy measurements reveal hot electron injection on the timescale of hundreds of femtoseconds. Photocurrent measurements confirm the hot‐electron‐enhanced photon‐carrier conversion, and in addition, gate‐voltage tuning of phase segregation is observed because of correlated carrier injection and halide migration in the perovskite films. Finally, the characteristics of the gate‐modulated light emission are found to conform to a rectified linear unit function, serving as nonlinear electrical‐to‐optical converters in artificial neural networks. Overall, the hot electron engineering approach demonstrated in this work provides effective location‐specific control of the phase and optical properties of halide perovskites, underscoring the potential of plasmonic metasurfaces for advancing perovskite technologies.

Efficient Intersystem Crossing in Extended Helical Perylene Diimide Dimers with Chalcogen-Annulation.

The properties and formation mechanisms of the triplet state have been widely investigated since they are crucial intermediates in photo functional devices. Specifically, helical PDI dimers, horizontal expanded π-conjugated derivatives of PDI, have shown outstanding performance as electron acceptors in enhancing the performance of photovoltaics. Therefore, the exploration of triplet generation in helical PDI dimers plays a crucial role in understanding the mechanisms and excavating their further application. We make use of Se-annulation to induce intersystem crossing (ISC) in helical PDI dimers and further explore the triplet evolution process systematically as the number of Se atoms increases by transient absorption spectroscopy and the hole-electron analysis method. It shows that the twisted molecular conformation has paved the way for potential ISC in a parent molecule PDI2. The incorporation of Se atoms can result in evident promotion in the efficiency of ISC (ϕTPDI2-2Se = 96.9%) compared to the parent molecule PDI2 (ϕTPDI2 = 26.5%), indicating that chalcogen-annulation is also an efficient strategy in a π-extended system. Our results provide useful insights for understanding the triplet evolution process, which can help broaden the application of the π-extended PDI system into high-performance photovoltaics.

Excited-State Dynamics of Carbazole and tert-Butyl-Carbazole in Thin Films

Thin films of carbazole (Cz) derivatives are frequently used in organic electronics, such as organic light-emitting diodes (OLEDs). Because of the proximity of the Cz units, the excited-state relaxation in such films is complicated, as intermolecular pathways, such as singlet–singlet annihilation (SSA), kinetically compete with the emission. Here, we provide an investigation of two benchmark systems employing neat carbazole and 3,6-di-tert-butylcarbazole (t-Bu-Cz) films and also their thin film blends with poly(methyl methacrylate) (PMMA). These are investigated by a combination of atomic force microscopy (AFM), femtosecond and nanosecond transient absorption spectroscopy (fs-TA and ns-TA) and time-resolved fluorescence. Excitonic J-aggregate-type features are observed in the steady-state absorption and emission spectra of the neat films. The S1 state shows a broad excited-state absorption (ESA) spanning the entire UV–Vis–NIR range. At high S1 exciton number densities of about 4 × 1018 cm−3, bimolecular diffusive S1–S1 annihilation is found to be the dominant SSA process in the neat films with a rate constant in the range of 1–2 × 10−8 cm3 s−1. SSA produces highly vibrationally excited molecules in the electronic ground state (S0*), which cool down slowly by heat transfer to the quartz substrate. The results provide relevant photophysical insight for a better microscopic understanding of carbazole relaxation in thin-film environments.

Reversible Photoinduced Ligand Substitution in a Luminescent Chromium(0) Complex.

Light-triggered dissociation of ligands forms the basis for many compounds of interest for photoactivated chemotherapy (PACT), in which medicinally active substances are released or "uncaged" from metal complexes upon illumination. Photoinduced ligand dissociation is usually irreversible, and many recent studies performed in the context of PACT focused on ruthenium(II) polypyridines and related heavy metal complexes. Herein, we report a first-row transition metal complex, in which photoinduced dissociation and spontaneous recoordination of a ligand unit occurs. Two scorpionate-type tridentate chelates provide an overall six-coordinate arylisocyanide environment for chromium(0). Photoexcitation causes decoordination of one of these six ligating units and coordination of a solvent molecule, at least in tetrahydrofuran and 1,4-dioxane solvents, but far less in toluene, and below detection limit in cyclohexane. Transient UV-vis absorption spectroscopy and quantum chemical simulations point to photoinduced ligand dissociation directly from an excited metal-to-ligand charge-transfer state. Owing to the tridentate chelate design and the substitution lability of the first-row transition metal, recoordination of the photodissociated arylisocyanide ligand unit can occur spontaneously on a millisecond time scale. This work provides insight into possible self-healing mechanisms counteracting unwanted photodegradation processes and seems furthermore relevant in the contexts of photoswitching and (photo)chemical information storage.

Crucial Roles of Leaving Group and Open-Shell Cation in Photoreaction of (Coumarin-4-yl)methyl Derivatives.

Photoreactions of (coumarin-4-yl)methyl derivatives have been extensively studied in many fields of chemistry, including organic synthesis and photoinduced drug delivery systems. The identification of the reaction intermediates involved in the photoreactions is crucial not only for elucidating the reaction mechanism but also for the application of the photoreactions. In this study, the photoreactions of 7-diethylamino(coumarin-4-yl)methyl thioester 1a [-SC(O)CH3], thionoester 1b [-OC(S)CH3], and ester 1c [-OC(O)CH3] were investigated to clarify the intermediary species and their chemical behavior. While a radical pair [i.e., 7-diethylamino(coumarin-4-yl)methyl radical and CH3C(O)S•] plays an important role in the photoreactions of 1a and 1b, an ion pair [i.e., 7-diethylamino(coumarin-4-yl)methyl cation, and CH3CO2-] was the key in the photoreaction of 1c. 18O-isotope-labeling of 1c revealed a negligible recombination process within the ion pair. The unprecedented observation was rationalized by the open-shell character of the 7-diethylamino(coumarin-4-yl)methyl cation, whose formation was confirmed through product analysis and transient absorption spectroscopy.

Revealing photoluminescence and nonlinear optical absorption characteristics of PbMo0.75W0.25O4 single crystal for optical limiting applications

Abstract Nonlinear absorption properties of PbMo0.75W0.25O4 single crystal fabricated by the Czochralski method were studied. The band gap energy of the crystal was determined as 3.12 eV. Urbach energy which represents the defect states inside the band gap was found to be 0.106 eV. PbMo0.75W0.25O4 single crystal has a broad photoluminescence emission band between 376 and 700 nm, with the highest emission intensity occurring at 486 nm and the lowest intensity peak at 547 nm, depending on the defect states. Femtosecond transient absorption measurements reveal that the lifetime of localized defect states is found to be higher than the 4 ns pulse duration. Open aperture (OA) Z-scan results demonstrate that the PbMo0.75W0.25O4 crystal exhibits nonlinear absorption (NA) that includes simultaneous two-photon absorption (TPA) as the dominant mechanism at the 532 nm excitations corresponding to 2.32 eV energy. NA coefficient (βeff) increased from 7.24 x 10-10 m/W to 8.81 x 10-10 m/W with increasing pump intensity. At higher intensities βeff tends to decrease with intensity increase. This decrease is an indication that saturable absorption (SA) occurred along with the TPA, called saturation of TPA. The lifetime of the defect states was measured by femtosecond transient absorption spectroscopy. Saturable absorption behavior was observed due to the long lifetime of the localized defect states. Closed aperture (CA) Z-scan trace shows the sign of a nonlinear refractive index. The optical limiting threshold of PbMo0.75W0.25O4 single crystal at the lowest intensity was determined as 3.45 mJ/cm2. Results show that the PbMo0.75W0.25O4 single crystal can be a suitable semiconductor material for optical limiting applications in the visible region.

Engineering Metal Halide Perovskite Nanocrystals with BODIPY Dyes for Photosensitization and Photocatalytic Applications.

The sensitization of surface-anchored organic dyes on semiconductor nanocrystals through energy transfer mechanisms has received increasing attention owing to their potential applications in photodynamic therapy, photocatalysis, and photon upconversion. Here, we investigate the sensitization mechanisms through visible-light excitation of two nanohybrids based on CsPbBr3 perovskite nanocrystals (NC) functionalized with borondipyrromethene (BODIPY) dyes, specifically 8-(4-carboxyphenyl)-1,3,5,7-tetramethyl-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BDP) and 8-(4-carboxyphenyl)-2,6-diiodo-1,3,5,7-tetramethyl-4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (I2-BDP), named as NC@BDP and NC@I2-BDP, respectively. The ability of I2-BDP dyes to extract hot hole carriers from the perovskite nanocrystals is comprehensively investigated by combining steady-state and time-resolved fluorescence as well as femtosecond transient absorption spectroscopy with spectroelectrochemistry and quantum chemical theoretical calculations, which together provide a complete overview of the phenomena that take place in the nanohybrid. Förster resonance energy transfer (FRET) dominates (82%) the photosensitization of the singlet excited state of BDP in the NC@BDP nanohybrid with a rate constant of 3.8 ± 0.2 × 1010 s-1, while charge transfer (64%) mediated by an ultrafast charge transfer rate constant of 1.00 ± 0.08 × 1012 s-1 from hot states and hole transfer from the band edge is found to be mainly responsible for the photosensitization of the triplet excited state of I2-BDP in the NC@I2-BDP nanohybrid. These findings suggest that the NC@I2-BDP nanohybrid is a unique energy transfer photocatalyst for oxidizing α-terpinene to ascaridole through singlet oxygen formation.

Unraveling the Ultrafast Photochemical Dynamics of Nitrobenzene in Aqueous Solution.

Nitroaromatic compounds are major constituents of the brown carbon aerosol particles in the troposphere that absorb near-ultraviolet (UV) and visible solar radiation and have a profound effect on the Earth's climate. The primary sources of brown carbon include biomass burning, forest fires, and residential burning of biofuels, and an important secondary source is photochemistry in aqueous cloud and fog droplets. Nitrobenzene is the smallest nitroaromatic molecule and a model for the photochemical behavior of larger nitroaromatic compounds. Despite the obvious importance of its droplet photochemistry to the atmospheric environment, there have not been any detailed studies of the ultrafast photochemical dynamics of nitrobenzene in aqueous solution. Here, we combine femtosecond transient absorption spectroscopy, time-resolved infrared spectroscopy, and quantum chemistry calculations to investigate the primary steps following the near-UV (λ ≥ 340 nm) photoexcitation of aqueous nitrobenzene. To understand the role of the surrounding water molecules in the photochemical dynamics of nitrobenzene, we compare the results of these investigations with analogous measurements in solutions of methanol, acetonitrile, and cyclohexane. We find that vibrational energy transfer to the aqueous environment quenches internal excitation, and therefore, unlike the gas phase, we do not observe any evidence for formation of photoproducts on timescales up to 500 ns. We also find that hydrogen bonding between nitrobenzene and surrounding water molecules slows the S1/S0 internal conversion process.

Rotation in attosecond vibronic coherence spectroscopy for molecules

Excitation or ionization of a molecule by ultrafast laser pulses can create a superposition of electronic states, whose dynamics is influenced by the interplay of electronic coherence and nuclear motion, resulting in charge migration and possibly charge transfer. Probing the vibronic coherence is therefore vital to monitoring electronic dynamics and controlling chemical reactivity, as recently demonstrated in molecules via attosecond transient absorption spectroscopy (ATAS). However, theories supporting the interpretation of ATAS experiments neglect the effects of molecular rotation, often leading to inaccurate interpretation of experimental data. Here, we develop a comprehensive theory for ATAS of molecules encompassing the entire pump-probe process. Applying the theory to N2, we demonstrate that the emergence of coherent signals critically depends on the consideration of molecular rotation. This work contributes to close the gap between theory and ATAS experiments, paving the way for monitoring electronic motion and controlling chemical reactivity in diverse molecular systems.

Halide Engineering in Mixed Halide Perovskite-Inspired Cu2AgBiI6 for Solar Cells with Enhanced Performance.

Cu2AgBiI6 (CABI) is a promising perovskite-inspired absorber for solar cells due to its direct band gap and high absorption coefficient. However, the nonradiative recombination caused by the high extrinsic trap density limits the performance of CABI-based solar cells. In this work, we employ halide engineering by doping bromide anions (Br-) in CABI thin films, in turn significantly improving the power conversion efficiency (PCE). By introducing Br- in the synthetic route of CABI thin films, we identify the optimum composition as CABI-10Br (with 10% Br at the halide site). The tailored composition appears to reduce the deep trap density as shown by time-resolved photoluminescence and transient absorption spectroscopy characterizations. This leads to a dramatic increase in the lifetime of charge carriers, which therefore improves both the external quantum efficiency and the integrated short-circuit current. The photovoltaic performance shows a significant boost since the PCE under standard 1 sun illumination increases from 1.32 to 1.69% (∼30% relative enhancement). Systematic theoretical and experimental characterizations were employed to investigate the effect of Br- incorporation on the optoelectronic properties of CABI. Our results highlight the importance of mitigating trap states in lead-free perovskite-inspired materials and that Br- incorporation at the halide site is an effective strategy for improving the device performance.

Size‐Dependent Multi‐Electron Donation in Metal‐Complex Quantum Dots Hybrid Catalyst for Photocatalytic Carbon Dioxide Reduction

AbstractThe effective conversion of carbon dioxide (CO2) into valuable chemical fuels relies significantly on the donation of multiple electrons. Its efficiency  is closely linked to both the density and lifetime of excited charge carriers. In this study, a hybrid catalyst system comprising covalently bonded InP/ZnS quantum dots (QDs) and Re‐complexes is showcased. The electronic band alignment between the QDs and the Re‐complexes is revealed to dominate the multi‐electron transfer process for photocatalytic conversion to methane (CH4). Notably, the size of the QDs is found to be a determining parameter. Among the three QD sizes investigated,  transient absorption spectroscopy studies unveil that rapid multi‐electron transfer from the QDs to the Re‐catalyst occurs in smaller QDs (2.3 nm) due to the substantial driving force. Consequently, the photocatalytic conversion of CO2 to CH4 is significantly enhanced with a turnover number of 6, corresponding to the overall apparent quantum yield of ≈1%. This research underscores the possibilities of engineering multi‐electron transfer by manipulating the electronic band alignment within a catalytic system. This can serve as a guide for optimizing photocatalytic CO2 reduction.

A hot phonon bottleneck observed upon incorporation of SnF2 to MASnI3 films and its possible role in increasing photocarrier diffusion length

While SnF2 is reported as an effective additive for improving the efficiency of lead-free tin-based perovskite solar cells, the mechanism is still unclear and requires further studies. Upon incorporating SnF2 into MASnI3, SnF2 reduces the intrinsic carrier density from 1018 to 1012 cm–3 and produces a longer carrier diffusion length as confirmed by the Hall measurements. The femtosecond transient absorption spectroscopy shows that SnF2 doping enhances the hot-phonon bottleneck effect of MASnI3. The slow cooling process of hot carriers may help to reduce non-radiative recombination, increase the fluorescence lifetime, and, therefore, improve the utilization rate of carriers. Finally, lead-free low bandgap perovskite MASnI3 is utilized as a light absorbing layer in solar cells, achieving high optical current and high voltage in tin-based perovskite solar cells. The final power conversion efficiency is 10.2%, while the power conversion efficiency for the control unit is 6.69%.

Impact of Packing Geometry on Excimer Characteristics and Mobility in Perylene Bisimide Polycrystalline Films.

Efficient exciton transport is essential for high-performance optoelectronics. Considerable efforts have been focused on improving the exciton mobility in organic materials. While it is feasible to improve mobility in organic systems by forming well-ordered stacks, the formation of trap states, particularly the lower-lying states referred to as excimers, remains a significant challenge to enhancing mobility. The mobility of excimer excitons intricately depends on the strength of excitonic coupling in terms of Förster-type diffusive exciton transfer processes. Given that the formation and mobility of excimer excitons are highly sensitive to molecular arrangements (packing geometries), conducting comprehensive investigations into the structure-property relationship in organic systems is crucial. In this study, we prepared three types of polycrystalline films of perylene bisimide (PBI) by varying substituents at the imide and bay positions, which allowed us to tailor the properties of excimer excitons and their mobility based on packing geometries and excitonic coupling strengths. By utilizing femtosecond transient absorption spectroscopy, we observed ultrafast excimer formation in the higher coupling regime, while in the lower coupling regime, the transition from Frenkel to excimer excitons occurs with a time constant of 500 fs. Under high pump-fluence, exciton-exciton annihilation processes occur, indicating the diffusion of excimer excitons. Intriguingly, employing a three-dimensional diffusion model, we derived a diffusion constant that is 3000 times greater in the high coupling regime than in the low coupling regime. To investigate the optoelectronic properties in the form of a bulk system, we fabricated n-type organic field effect transistors and obtained 8000 times higher mobility in the high coupling regime. Furthermore, photocurrent measurements enable us to investigate the charge carrier transport by mobile excimer excitons, suggesting a 230-fold improvement in external quantum efficiency with tightly packing PBI molecules compared to the low coupling regime. These findings not only offer valuable insights into optimizing organic materials for optoelectronic devices but also unveil the intriguing potential of exciton migration within excimers.

Photonic Properties of Thin Films Composed of Gallium Nitride Quantum Dots Synthesized by Nonequilibrium Plasma Aerotaxy.

Gallium nitride quantum dots (GaN QDs) are a promising material for optoelectronics, but the synthesis of freestanding GaN QDs remains a challenge. To date, the size-dependent photonic properties of freestanding GaN QDs have not been reported. Here, we examine the photonic properties exhibited by thin films composed of GaN QDs synthesized by nonequilibrium plasma aerotaxy. Each film exhibited two photoluminescence peaks after exposure to ambient air. The first peak was in the ultraviolet spectral region, and the second peak was in the visible region. Both peak positions depended on the QD size. Our findings, supported by transient absorption spectroscopy experiments, suggest that conduction band to valence band recombination was the cause of the ultraviolet photoluminescence and that recombination between the conduction band and an acceptor level was the cause of visible photoluminescence. Furthermore, we show that coating the surface of fresh QDs with Al2O3 suppressed the visible region photoluminescence, corroborating the conclusion that the photoactive defect was caused by oxidation in air.

Heteroatom‐Doped Ag25 Nanoclusters Encapsulated in Metal–Organic Frameworks for Photocatalytic Hydrogen Production

AbstractAtomically precise metal nanoclusters (NCs) with unique optical properties and abundant catalytic sites are promising in photocatalysis. However, their light‐induced instability and the difficulty of utilizing the photogenerated carriers for photocatalysis pose significant challenges. Here, MAg24 (M=Ag, Pd, Pt, and Au) NCs doped with diverse single heteroatoms have been encapsulated in a metal–organic framework (MOF), UiO‐66‐NH2, affording MAg24@UiO‐66‐NH2. Strikingly, compared with Ag25@UiO‐66‐NH2, the MAg24@UiO‐66‐NH2 doped with heteroatom exhibits much enhanced activity in photocatalytic hydrogen production, among which AuAg24@UiO‐66‐NH2 presents the best activity up to 3.6 mmol g−1 h−1, far superior to all other counterparts. Moreover, they display excellent photocatalytic recyclability and stability. X‐ray photoelectron spectroscopy and ultrafast transient absorption spectroscopy demonstrate that MAg24 NCs encapsulated into the MOF create a favorable charge transfer pathway, similar to a Z‐scheme heterojunction, when exposed to visible light. This promotes charge separation, along with optimized Ag electronic state, which are responsible for the superior activity in photocatalytic hydrogen production.